Всё так и делаю, только DirectUSB перевёл в Level: DEBUG
Вот тогда он и показывает:
AMBA_USB_Dev_Deinit:()
AMBA_USB_Dev_Deinit.()
AMBA_USB_Init:()
AMBA_USB_Dev_Init:()
Found 0 busses, 0 devices changed
AMBA_USB_Configure:(0x003DA488,0x0012E9DC)
Dev#0: 0x4255 (Amba) : 0x0001 (A4 ) : 123456789ABC has 1 configs
AMBA_USB_Configure.(0x003D3F30)
AMBA device found!
AMBA_USB_Dev_Init.(0)
AMBA_Check_State: (0x0012E9DC)
State is BOOT
AMBA_Check_State. (0x0)
AMBA_USB_Init.(0)
AMBA_USB_EraseFlash: Enter
[yuchi]AMBA_Load_BLD: (C:\Program Files\Ambarella\DirectUSB\a2sbld.bin)
[yuchi]AMBA_Load_File: (C:\Program Files\Ambarella\DirectUSB\a2sbld.bin,0x00000000,0x0146FD9C)
AMBA_Load_File. (0)
Load BLD start.
Load BLD end.
AMBA_Load_BLD. (0)
AMBA_USB_Reinit_Wait: (1)
Wait device re-init...
AMBA_USB_Dev_Deinit:()
AMBA_USB_Dev_Deinit.()
AMBA_USB_Init:()
AMBA_USB_Dev_Init:()
Found 0 busses, 2 devices changed
AMBA_USB_Configure:(0x003DA6C0,0x0146FD54)
Dev#0: 0x4255 (AMBA) : 0x0001 (Ambarella USB generic class) : 123456789ABC has 1 configs
AMBA_USB_Configure.(0x003D3F30)
AMBA device found!
AMBA_USB_Dev_Init.(0)
AMBA_Check_State: (0x0146FD54)
State is LOAD
AMBA_Check_State. (0x1)
AMBA_USB_Init.(0)
AMBA_USB_Reinit_Wait. (0)
AMBA_USB_Simple_Command: (0x5,0x0,0x0,0x0,0x0)
AMBA_USB_Simple_Command. (0)
AMBA_USB_Simple_Response: (0x0146FED4,0x0146FED8)
AMBA_USB_Simple_Response. (0,0x55525350,0x0,0x64,0x1)
AMBA_Erase_Flash failed
Done!!
AMBA_USB_EraseFlash. (0)