а как с флэшки-то? везде лежат пакеты для прошивки 1030 с помощью BurnTool v07.2 , которая цепляет 4 файла(system, u-boot, userdata и zImage), а с флешки шьется с совсем другим набором файлов
Файл подсказки из архива с прошивкой 1204 (выделено мной):
The way for upgrade and announcements for ZT-180 Tablet
This edition offers two ways for upgrade, one is by TF card and another is by USB cable.
1, By USB Cable
This software package has its own burning tool named "Ў°burntool_factory.exeЎ±,
and you do not need to choose "setting" in the burning process, you just need to put all the necessary files in the directory same as burning tool.
Connect the device with computer by USB cable, when the status square turn green, click the "start ".
After finishing upgrade, pull up the cable, do not need to press the reset port ,just need to press "HOME" menu to turn to the desktop .
2, By TF card
Copy the directory of "zt-update " to the root directory of TF card
Insert the TF card to TF card port, Press the left side of the "Menu key" at the same time when you open the tablet
(The menu key is the last long key on the top of tablet)
Follow the instructions appeared on the screen, the device will do the upgrade and restart by itself.
Attention:
1) In this firmware ,there are two resolutions can be supported,they are 1024X576 & 1024X600,The default resolutions version is 1024X600.
If the screen resolution is 1024X576 ,pls change the "zImage_1024*600" filename to "ZImage"
If the screen resolution is 1024X600 , pls change the "zImage_1024*576" filename to "ZImage"
2)
If the tablet is burned by "burntool-v07.2" when it comes out from factory, then we have to use the upgrade way by USB cable for the first time of upgrade,After the first time ,we can use either TF card way or USB cable way for second or more upgrade. Announcements
As the firmware contains SPL program, so there are two issues which should be paid attention to .
1) SPL upgrade is risky, if power cut happens in the process, the netbook has to be repaired. Time of duration for this risk is less than 5s.so it can not be power cutted during upgrade process,please insert the charger to ZT-180.
2) After SPL upgrade, it can not burn back to common edition, it can only upgrade to new edition from zenithink ,not back to old any more.
Пробую другие флешки и карты памяти, всё О.К появляется в меню форматирования просто "фат". Пробовал под 7 и ХР , пробовал командной строкой, где копать? Или двигать в магазин за новой? :unknown: Да, флешка "но нейм" , взята на сдачу в продуктовом магазине
